FLT-6020ET Three-chuck Laser Tube Cutting Machine

0 tail material  High efficiency


FLT-6022ET is a three-chuck machine developed in response to market requirements, and the whole machine is a cost-effective machine both in terms of performance and configuration.

CNC clamping system

Three chuck clamping to achieve the pulling type of pipe cutting, to a certain extent can achieve cutting zero tail material

Bus-based systems

Equipped with Bertru CNC 5000A bus type system for faster and more stable cutting performance.

Front splice device

The following type front receiving device can automatically realize sieving, dividing and automatic turning, with high mechanization performance

Product Specification

NO. Item Parameter Unit
1 Maximum cut pipe length 0~6000 (more than 2.8m need to customize the front joint)


2 Cut pipe diameter 15~230(external circle of workpiece


3 Minimum tail material ≥0 (related to workpiece length and actual cutting)


4 X, Y, Z axis positioning accuracy ±0.05/1000mm


5 X, Y, Z axis repeat positioning accuracy ±0.03/1000mm


6 Acceleration speed 1g


7 Max. running speed 75


8 Maximum load weight 250


9 Loading weight 6500


10 Host shape (length, width and height) Approx. 12435×1940×2400


11 Laser power ***


12 Control system Pachu 5000A


13 Power of the whole machine ***


14 Power supply requirements 380v/50Hz±10%


Related Applications
Fiber laser cutting machines two common perforation methods

What are the two common perforation methods for fiber laser cutting machines?At present, most of the laser cutting processes on the market are cutting and punching. Specifically, a small hole is opened in the middle of the sheet or tube, and then cut along the outward direction. A few of them can be

solution-houxu - 副本.jpg
What are the limiting factors of laser cutting machine?

What are the factors that the laser cutting machine is not limited?If the limiter is not limited, first pay attention to whether it is a mechanical problem. If there are many sundries blocked in the gear, it is easy to jump the teeth. It is possible that the limiter does not touch the upper limiter

Factors affecting the cutting size of laser cutting machine

What factors affect the cutting size of laser cutting machineThe cutting size of laser cutting machine is generally affected by two aspects: one is material and the other is assembly. The cutting dimension is mainly based on a parallel platform. If both X \ Y axes are parallel, there will be no too

Three main factors affecting the service life of the laser pipe cutting machine

1. The wear between the mechanical bearings during use will affect the service life. During use, lubricating oil should be regularly applied to the gear bearings to reduce mechanical wear.2. The working environment of the machine should be cleaned frequently. A lot of waste and dust will be generate

Future Application

With the global manufacturing centre moving to China, the CNC laser cutting machine

Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?



Add : No.5, Liandong U Valley, No.2222 Yuqing Road, Changqing District, Jinan
Tel : +86-0531-88976878
Phone : +86-18560186916
E-mail : jqlaser@jqlaser.com
Whatsapp : +86-18560186916

Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd. 
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd.