MN CNC laser tube cutting machine

Automatic loading and worry-free
MN4
MN3
MN2
MN

MN

MN laser pipe cutting machine is mainly used for cutting and processing round, square, rectangular, oval and waist round pipes of common carbon steel, stainless steel and other materials, with a wide range of applications.

Welding bed

    The bed is welded as a whole and treated by annealing to eliminate internal stress, and then finish machining after rough machining and vibration aging, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The machine is equipped with automatic lubrication device, which adds lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts operate in good condition, which can improve the service life of the guide rails, gears and rack and pinion.

Pneumatic chucks

Full-stroke pneumatic chuck closed design to avoid environmental pollution affecting the chuck speed when cutting

Busbar type tube cutting system

Busbar tube cutting system with extensive nesting software, powerful

Product Specification

NO. Item Parameter Unit
1 Pipe processing size Round pipe Φ15-φ120; square pipe side length ≤85; rectangular pipe profile diagonal ≤120mm; L≤6500.

mm

2 Automatic loading workpiece size range (single tube weight not more than 70kg) Round pipe: Φ30mm-Φ100mm, single pipe weight ≤70kg; square pipe: side length 25mm-70mm; pipe full-length straightness ≤0.1D, and the maximum can not exceed 10mm.(Note: the rest of the pipe does not support automatic loading)

mm

3 Automatic loading length 5900 ≤ workpiece ≤ 6100

mm

4 Loading weight 1500

kg

5 X-axis stroke 160

mm

6 Y-axis stroke 7200

mm

7 Z-axis stroke 120

mm

8 X、Y axis positioning accuracy ±0.05/1000mm

mm

9 X、Y axis repeat positioning accuracy ±0.03/1000mm

mm

10 Acceleration speed 1.5G

m/s²

11 Y-axis maximum operating speed 90

m/min

12 Max. idle speed of chuck 150

r/min

13 Tail material length ≥100

mm

14 Maximum shape of the main machine (length, width and height) About 10700×3500×2500

mm

15 Laser power ***

Kw

16 Control system Pachu 3000S

 

  Power of the whole machine ***

Kw

  Power supply requirements 380V/50Hz

V

Related Applications
789.jpg
Fiber laser cutting machines two common perforation methods

What are the two common perforation methods for fiber laser cutting machines?At present, most of the laser cutting processes on the market are cutting and punching. Specifically, a small hole is opened in the middle of the sheet or tube, and then cut along the outward direction. A few of them can be

solution-houxu - 副本.jpg
What are the limiting factors of laser cutting machine?

What are the factors that the laser cutting machine is not limited?If the limiter is not limited, first pay attention to whether it is a mechanical problem. If there are many sundries blocked in the gear, it is easy to jump the teeth. It is possible that the limiter does not touch the upper limiter

news-houxu.jpg
Factors affecting the cutting size of laser cutting machine

What factors affect the cutting size of laser cutting machineThe cutting size of laser cutting machine is generally affected by two aspects: one is material and the other is assembly. The cutting dimension is mainly based on a parallel platform. If both X \ Y axes are parallel, there will be no too

IMG_2390.JPG
Three main factors affecting the service life of the laser pipe cutting machine

1. The wear between the mechanical bearings during use will affect the service life. During use, lubricating oil should be regularly applied to the gear bearings to reduce mechanical wear.2. The working environment of the machine should be cleaned frequently. A lot of waste and dust will be generate

新闻配图.jpg
Future Application

With the global manufacturing centre moving to China, the CNC laser cutting machine

WX20210514-1023332x.png
Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?

QUICK LINKS

CONTACT US

Add : No.5, Liandong U Valley, No.2222 Yuqing Road, Changqing District, Jinan
Tel : +86-0531-88976878
Phone : +86-18560186916
E-mail : jqlaser@jqlaser.com
Whatsapp : +86-18560186916

FEEDBACK
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd. 
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd.