FLT-6022F Laser tube cutting machine

Fully Automatic Loader and unloader    Italian Designed safety cover


FLT-6022F is a high-end model independently developed and designed by Jinqiang Laser, with a machine length of 11.2 meters and a machine weight of 18 tons; it is equipped with a fully automatic loading frame to reduce manual intervention and shorten the production period, and it cooperates with large manufacturers from the body to the accessories, and the laser can be selected by itself, so the quality is reliable and trustworthy.

Welding bed

    The bed is welded as a whole and treated by annealing to eliminate internal stress, and then finish machining after rough machining and vibration aging, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The machine is equipped with automatic lubrication device, which adds lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts operate in good condition, which can improve the service life of the guide rails, gears and rack and pinion.

Front splice device

The front pick-up device includes 2 sets of cylinder-controlled support mechanisms to hold the pipe when it is cut down to a longer length and serve to prevent it from sagging.

CNC clamping system

The front pick-up device is equipped with the ability to complete continuous cutting of tubes and improve processing efficiency.

Product Specification

NO. Item Parameter Unit
1 Maximum cut pipe length 0~6000 (more than 3 meters need to extend the front joint material)


2 Cutting pipe diameter 20~220 (external circle of workpiece)


3 Length 3500~6000


4 Pipe Diameter 20~220mm, straightness of pipe full length ≤0.1D, and the maximum can not exceed 10mm


5 Load capacity ≤2500


6 Maximum single pipe weight 200Kg (long-term continuous work requires a single tube weight ≤ 150kg)


7 Minimum tailstock 100mm (depending on the length of the workpiece and the specific process conditions, usually the length of the workpiece in ≥ 300, or round tube diameter ≥ 50mm, rectangular tube outer circle ≥ 70mm, in the case of ensuring the cutting accuracy, can not guarantee the minimum tail material length)


8 X、Y-axis positioning accuracy ±0.05/1000mm


9 X、Y-axis repeatability ±0.03/1000mm


10 Acceleration speed 1g


11 Max. running speed 80


12 Chuck load weight 150Kg for each front and rear chuck


13 Loading weight Approx. 18000


14 Main machine shape (length, width and height) Approx. 11,200×6800×2400


15 Laser power *


16 Control system PA


17 Power of the whole machine *


18 Power supply requirements 380v/50Hz


Related Applications
Fiber laser cutting machines two common perforation methods

What are the two common perforation methods for fiber laser cutting machines?At present, most of the laser cutting processes on the market are cutting and punching. Specifically, a small hole is opened in the middle of the sheet or tube, and then cut along the outward direction. A few of them can be

solution-houxu - 副本.jpg
What are the limiting factors of laser cutting machine?

What are the factors that the laser cutting machine is not limited?If the limiter is not limited, first pay attention to whether it is a mechanical problem. If there are many sundries blocked in the gear, it is easy to jump the teeth. It is possible that the limiter does not touch the upper limiter

Factors affecting the cutting size of laser cutting machine

What factors affect the cutting size of laser cutting machineThe cutting size of laser cutting machine is generally affected by two aspects: one is material and the other is assembly. The cutting dimension is mainly based on a parallel platform. If both X \ Y axes are parallel, there will be no too

Three main factors affecting the service life of the laser pipe cutting machine

1. The wear between the mechanical bearings during use will affect the service life. During use, lubricating oil should be regularly applied to the gear bearings to reduce mechanical wear.2. The working environment of the machine should be cleaned frequently. A lot of waste and dust will be generate

Future Application

With the global manufacturing centre moving to China, the CNC laser cutting machine

Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?



Add : No.5, Liandong U Valley, No.2222 Yuqing Road, Changqing District, Jinan
Tel : +86-0531-88976878
Phone : +86-18560186916
E-mail : jqlaser@jqlaser.com
Whatsapp : +86-18560186916

Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd. 
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd.