FLT-6020ETN Three chuck laser tube cutting machine

Triple Chuck Giving a new definition to tubes


It is mainly used for round, square, rectangular, elliptical and waist round tubes of common carbon steel and stainless steel, etc. The external circle size of cutting workpiece is Φ15-Φ230mm, and the maximum length of raw material is 6000mm.

Welding bed

    The bed is welded as a whole and treated by annealing to eliminate internal stress, and then finish machining after rough machining and vibration aging, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The machine is equipped with automatic lubrication device, which adds lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts operate in good condition, which can improve the service life of the guide rails, gears and rack and pinion.

Automatic Bundle Loader

Universal loading device to meet the fully automatic loading of round, square and rectangular tubes, saving manual loading time.

CNC clamping system

Three cards shift each other to achieve any length of pipe cutting and feeding, the largest possible use of the whole pipe, to achieve "0 tail material" cutting.

Follow-the-movement receiving device

Servo-following splicing device: according to the input pipe specification, the system adjusts the supporting action during cutting by itself, which minimizes the influence of pipe error caused by pipe length sagging and ensures cutting accuracy.

Product Specification

NO. Item Parameter Unit
1 Maximum cut pipe length 0~2800


2 Cut pipe diameter 15~230 (external circle of workpiece)


3 Minimum tailstock ≥0 (related to workpiece length and actual cutting)


4 Length 5500~6050


5 Pipe diameter D Round tube diameter 20~150, square tube 20×20~150×150, straightness of the whole length of the tube ≤0.1D, and the maximum can not exceed 10mm


6 Load-bearing capacity ≤2000


7 Maximum load capacity of a single tube 100Kg (Long-term continuous work requires a single tube weight ≤ 70kg)


8 X, Y, Z axis positioning accuracy ±0.05/1000mm


9 X, Y, Z axis repeatability ±0.03/1000mm


10 Acceleration speed 1g


11 Maximum running speed 75


12 Chuck speed 100


13 Max. load weight 240


14 Weight of loading machine 9000


15 Main machine shape (length, width and height) Approx. 12435×4500×2400


16 Laser power ***


17 Control system Bertru 5000A


18 Power of the whole machine ***


19 Power supply requirements 380v/50Hz±10%


Related Applications
Fiber laser cutting machines two common perforation methods

What are the two common perforation methods for fiber laser cutting machines?At present, most of the laser cutting processes on the market are cutting and punching. Specifically, a small hole is opened in the middle of the sheet or tube, and then cut along the outward direction. A few of them can be

solution-houxu - 副本.jpg
What are the limiting factors of laser cutting machine?

What are the factors that the laser cutting machine is not limited?If the limiter is not limited, first pay attention to whether it is a mechanical problem. If there are many sundries blocked in the gear, it is easy to jump the teeth. It is possible that the limiter does not touch the upper limiter

Factors affecting the cutting size of laser cutting machine

What factors affect the cutting size of laser cutting machineThe cutting size of laser cutting machine is generally affected by two aspects: one is material and the other is assembly. The cutting dimension is mainly based on a parallel platform. If both X \ Y axes are parallel, there will be no too

Three main factors affecting the service life of the laser pipe cutting machine

1. The wear between the mechanical bearings during use will affect the service life. During use, lubricating oil should be regularly applied to the gear bearings to reduce mechanical wear.2. The working environment of the machine should be cleaned frequently. A lot of waste and dust will be generate

Future Application

With the global manufacturing centre moving to China, the CNC laser cutting machine

Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?



Add : No.5, Liandong U Valley, No.2222 Yuqing Road, Changqing District, Jinan
Tel : +86-0531-88976878
Phone : +86-18560186916
E-mail : jqlaser@jqlaser.com
Whatsapp : +86-18560186916

Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd. 
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd.