JQ-1530CP Fiber Laser Combined Machine With Auto Pallet Changer

one machine dual use two exchangeable work platform


For metal processing industry, JQ developed a special type of multifunctional fiber laser cutting machine--JQ1530CP, which can not only process tube and plate at same time, but also hes exchangeable work platform. This type is mainly for plate cutting and partly for tube cutting.

Exchange platform

Through staggered layer exchange platform and switching motor controlled by frequency converter, The work bed can be exchanged within 15s.


smaller space be taken and high production efficiency. Two processing abilities for tube and plate can save more than 50% of space compare with two different machines,

High precision chucks

The chuck is divided into 2 pneumatic full stroke chucks, front and rear, the rear chuck is movable (Y axis) and the front chuck is fixed. The rear chuck is mounted on the bed for cutting and clamping the feeding material, and the front chuck is mounted on the end of the bed for clamping the material used. The front and rear chucks are driven by servo motor respectively, which can realize synchronous rotation.

Aircraft aluminum crossbeam

The low-pressure steel film casting process is used, so the crossbeam has high denseness,stiffness and light weight, which can get higher dynamic response and
Improved processing efficiency.

Product Specification

NO. Item Parameter Unit
1 Flat cutting width (length X width) 3000x1500


2 Pipe cutting specifications Φ16-φ220, L=6000.


3 X-axis stroke (Square tube and rectangular tube diagonal ≤ 200mm)


4 Y-axis stroke 2350


5 Z-axis stroke 3050


6 X and Y axis positioning accuracy 240


7 X and Y axis repeat positioning accuracy ±0.05/1000mm


8 Acceleration speed ±0.03/1000mm


9 Max. running speed 1G


10 Max. speed of rear chuck 80


11 Tailstock length 100


12 Max. loading capacity of platform ≥90(It will be slightly different according to the specific pipe)


13 Host shape (length, width and height) 900


14 Laser power 7600×3500×1700(including cut pipe part


15 Control system ***


16 Power of the whole machine cypcut


17 Power supply requirements ***


Related Applications
Fiber laser cutting machines two common perforation methods

What are the two common perforation methods for fiber laser cutting machines?At present, most of the laser cutting processes on the market are cutting and punching. Specifically, a small hole is opened in the middle of the sheet or tube, and then cut along the outward direction. A few of them can be

solution-houxu - 副本.jpg
What are the limiting factors of laser cutting machine?

What are the factors that the laser cutting machine is not limited?If the limiter is not limited, first pay attention to whether it is a mechanical problem. If there are many sundries blocked in the gear, it is easy to jump the teeth. It is possible that the limiter does not touch the upper limiter

Factors affecting the cutting size of laser cutting machine

What factors affect the cutting size of laser cutting machineThe cutting size of laser cutting machine is generally affected by two aspects: one is material and the other is assembly. The cutting dimension is mainly based on a parallel platform. If both X \ Y axes are parallel, there will be no too

Three main factors affecting the service life of the laser pipe cutting machine

1. The wear between the mechanical bearings during use will affect the service life. During use, lubricating oil should be regularly applied to the gear bearings to reduce mechanical wear.2. The working environment of the machine should be cleaned frequently. A lot of waste and dust will be generate

Future Application

With the global manufacturing centre moving to China, the CNC laser cutting machine

Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?



Add : No.5, Liandong U Valley, No.2222 Yuqing Road, Changqing District, Jinan
Tel : +86-0531-88976878
Phone : +86-18560186916
E-mail : jqlaser@jqlaser.com
Whatsapp : +86-18560186916

Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd. 
Copyright  2021 Jinan JinQiang Laser CNC Equipment Co.,Ltd.