JQ-1530HP
Começar com o pé direito
Corte de chapa
Power available
6 – 12KW
1500KG
Área de trabalho: 3000*1500mm
Curso do eixo X: 1520mm
Curso do eixo Y: 3020mm
Z-axis travel: 1520mm
O melhor da tecnologia no membro mais pequeno da família
With the new Plate Cutter cutting head equipped on the JQ-1530HP, you will produce high quality parts. With automatic focus and integrated parâmetro do laser não há necessidade de ajustamentos.
Desempenho baseado na robustez e, sobretudo, na fiabilidade.
Ergonómico e acessível
Shipping solutions such as shipping in a container without removing sheet metal and beams
Improved bed anti-burning material: graphite plate changed to cast iron plate.
Cast iron plate installation is better than graphite plate. Cast iron is hung, while graphite plate needs to be installed and fixed by separate sheet metal;
The strength of cast iron is better than that of graphite plate. Cast iron is not easy to break and has a long service life, while graphite is easy to break and has a short cycle (30 yuan/KG);
Cast iron has a relatively high carbon content and is not easy to melt with ordinary slag. It is easy to clean slag and can be used repeatedly;
Cast iron has a relatively high residual value, while graphite plate can be almost ignored.
The bed structure adopts plate-welded box-type frame structure, rationally arranges rib plates, and adopts plug-in structure for key overlap. Strict welding process is formulated, and annealing and stress relief treatment are carried out to ensure the stability of the bed.
The rear bed adopts a connecting structure layout, which effectively improves the force-bearing characteristics while being lightweight, ensuring beauty, no sheet metal required, and simple and elegant.
As melhores escolhas mostram o seu valor ao longo do tempo
The crossbeam is made of aviation-grade high-strength aluminum alloy, and the extruded aluminum profile structure adopts an outer square and inner circle + cross-partitioned composite structure. While being lightweight, each stress-bearing surface is individually provided with reinforcing ribs to extremely enhance the dynamic response of motion.
Table frame assembly:
Modular arrangement of knife bars;
Staggered arrangement of knife tips, providing effective three-point support;
High-power anti-burning cast iron bars, which increase service life and facilitate slag cleaning.
Lifting of the material cart:
The handle adopts a T-shaped mechanism, which is easy to push and pull with both hands, and is warped upward at the same time, which is convenient for workers to quickly get started;
The main structure of the box adopts an inverted “J” bend + horizontal channel steel design, which can effectively strengthen the structure and reduce thermal deformation;
The bed is equipped with a guide structure + limit baffle, which is easy to push and pull the material cart
Table frame locking and transmission optimization:
Using 2 high-rigidity gate locks;
The transmission adopts a double transmission shaft design to ensure effective torque transmission;
Design of flue:
The size of the partition dust removal opening is 120*400mm, and the ventilation area is +30%;
The flap valve is replaced, and the design without partition greatly reduces the wind resistance coefficient;
An L-shaped galvanized air duct is set on the back side of the bed, and the air duct outlet is set on the right rear side of the front bed, which is convenient for on-site installation.
Optimization of beam fixing method:
The original beam and slider were only connected by screws, without positioning design. V2.0 adds positioning and adopts fixed + floating positioning method to ensure the stability of high-speed movement.
Optimization of the Z-axis machine head:
The laser head connecting plate is thicker, has reinforcement ribs, and has optimized weight;
The sheet metal has added heat dissipation holes for the motor and electrical proportional valve;
The Z-axis has added volumetric quantitative lubrication.
Improved sheet metal protection:
The external sheet metal is sealed with the bed and all parts to separate the entire cutting area from the outside;
The rear side uses a contoured sheet metal lifting door to reduce the area of fireproof cloth, effectively prevent light leakage and increase service life;
Fiber optic plug-in-free design.
O conjunto de software que cria valor
Conceção de peças e estruturas num ambiente gráfico tridimensional CAD/CAM concebido para explorar todas as margens de desempenho da Placa laser.
Bibliotecas de funções que aceleram e simplificam o desenho na placa.
Estimativas exactas de tempo e custo dos lotes para um orçamento detalhado.
Planeamento remoto e acompanhamento em tempo real dos trabalhos em curso.
Tudo isto e muito mais faz a diferença todos os dias em termos de poder tirar o máximo partido de um sistema de corte a laserreduzindo os tempos de inatividade improdutivos e eliminando o desperdício.
Uma escolha de valor também envolve software.
