S120L
Begin with a solid foundation
Round, square,
rectangular tubes
3D
80 kg
(10 to 120 mm)
Ailenin en küçük üyesinde teknolojinin en iyisi
1. The main pipe connecting the bed and the guide rail mounting surface is thickened, the legs are thickened, the connecting auxiliary pipe is weakened, and the pipe wall is 5mm;
2. The lifting plate is directly welded on the bed cross brace.
3. The beam mounting surface is coplanar with the chuck mounting surface.
4. The laser support plate is welded on the side of the bed.
5. The forklift position adds a welded vertical support.
6. The anchor plate is directly welded on the vertical pipe leg and an operation port is opened.
7. The support pipeline runs through the internal main pipe of the bed, and an operation port is opened on the inside.
Ergonomik ve erişilebilir
Gantry part
1. The single cantilever structure is changed to a gantry structure, which is more stable.
2. The X and Z axes are upgraded to Zeen fully enclosed modules with good dustproof effect.
3. The Jinqiang laser head is selected, the base is removed for installation, and the amplifier is external, so that the cutting center line is extremely close to the chuck to reduce the tail material.
4. The X/Z axis motor is upgraded to a 750 servo motor.
5. The X/Z axis line uses a bellows connection protection to replace the original drag chain, which saves costs and is more convenient for maintenance.
Upgrade rail protection
1. The bed protection sheet metal adopts an inner bending design to reduce the pollution of falling iron filings and dust to the guide rail.
2. The rear card guard adopts a three-cover open design to facilitate maintenance and repair.
Optimized protection
1. Remove the head frame and directly assemble the sheet metal box to reduce assembly links and save sheet metal weight.
2. Adopt a coverless, open-door design with wide space for easy maintenance and repair.
3. The laser is moved outward to save electrical control layout.
4. The vacuum pipe is built-in to reduce the cross-clutter of pipes and make the layout reasonable.
En iyi seçimler zaman içinde değerini gösterir
- Chuck diameter 120mm, 160mm optional.
- Standard 6m version loading.
- Standard 2 sets of variable diameter wheels for material support.
- Laser 3kw and below optional.
- Standard JQ system (Q) with built-in nesting.
- Standard JQ 3D automatic focusing laser head.
- Standard VEICHI, INVT servo motor, Mandolin reducer.
- Electric control cabinet standard air conditioner.
- Overseas shipment can achieve two units per cabinet.
Değer yaratan yazılım paketi
Lasertube'lerin her türlü performans marjından yararlanmak üzere tasarlanmış üç boyutlu grafik CAD/CAM ortamında parça ve çerçeve tasarımı.
Hızlandıran ve basitleştiren işlev kütüphaneleri tüp üzeri̇nde tasarim.
Ayrıntılı bir tahmin için doğru parti süresi ve maliyet tahminleri.
Uzaktan planlama ve devam eden işlerin gerçek zamanlı izlenmesi.
Tüm bunlar ve daha fazlası, her gün bir araçtan tam olarak yararlanabilmek açısından fark yaratıyor. lazer kesim sistemiverimsiz duruş sürelerini azaltır ve israfı ortadan kaldırır.
Değer seçimi aynı zamanda yazılımı da içerir.
