Heavy Duty Horizontal Two Chucks Tube Laser Cutting Machine FLT-9035ETN
FLT-9035ETN is a high productivity, heavy duty horizontal two chucks tube laser cutting machine. The machine is equipped with two independent laser heads, each with its own dedicated CNC controller. This allows the operator to quickly and easily change between the two laser heads, depending on the application. The machine also features a touch screen interface for easy operation and an automatic loading/unloading system for maximum efficiency.
|Maximum cutting length||≤9000mm|
|Maximum weight for each tube||200kg|
|Cutting diameter||16-350mm O.D.|
|X.Y.Z axis position accuracy||±0.05mm/m|
|Maximum running speed||60m/min|
The main use and application scope of the product
It is mainly used for round, square, rectangular, elliptical and waist round tubes of common carbon steel and stainless steel etc. The outer circle size of cutting workpiece is Φ16-Φ350mm, the maximum length of raw material is 4000-9000mm, and the loading space is about 9400mm.
The main composition of the product
The main components of FLT-9035ETN series laser pipe cutting machine are: main machine tool, automatic feeding frame, feeding conveyor chain device, control system, low-voltage electrical system, laser, water chiller, extractor fan, etc.
Machine tool host part
The host part of the machine is the main component of the whole laser pipe cutting machine, the laser pipe cutting machine cutting function and cutting accuracy are achieved by the host part, the host part by the bed, with the support, side column, chuck part, X / Z axis device, with the material receiving device, auxiliary systems (protective cover, air and water), operation screen and other parts.
Automatic loading frame
The loading frame is composed of storage lifting device, horizontal conveying device, pressing device, dividing device, lifting device, flush device, clamping claw loading device and other components. It can realize the bundle of pipes put into the storage basket at one time, and the pipes are automatically lifted and loaded, with rectangular pipe stacking detection and attitude correction function. The dividing device can ensure that only one pipe is conveyed to the front end at a time.
Lowering conveyor chain device
The downcomer conveyor chain unit consists of multiple transverse chain conveyors that take up the cut pipe and transport it out transversely. The chain operation is controlled by a variable frequency motor.
Electrical control part
The laser pipe cutting machine electrical control system is an important part to ensure the running trajectory of various graphics, the general electrical control system mainly consists of CNC system and low-voltage electrical system.
The CNC system of this machine is equipped with Bertru high-performance bus type 5000A CNC system, which is based on windows operating platform, stable and reliable operation, contains 32-bit microprocessor, and can be matched with nesting software.
Low voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the whole machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor is used to drive the X-axis, Y-axis, AW (synchronous rotation) axis of the machine tool, characterized by good acceleration performance, fast response speed, X,Y-axis maximum positioning speed up to 75m/min; machine tool Z-axis for the feed axis, using AC servo motor (with holding brake) for driving: that is, Z-axis cutting head, characterized by good dynamic response characteristics, both with the control and can be NC control.
The fiber laser
The fiber laser used has higher photoelectric conversion efficiency, lower power consumption and better beam quality compared to traditional lasers. The laser is compact, maintenance-free operation and ready for use. Due to its flexible laser output method, it can be easily integrated with system equipment.
Including water chillers, exhaust systems, etc.
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.