Tube bevel cutting skill by tube laser cutting machine

What is a bevel tube fiber laser cutter?

A bevel tube fiber laser cutter is a machine that uses a high-power laser to cut through metal tubing. The laser is directed through a small opening in the side of the machine, and is focused onto the metal tubing that is being cut. The laser cuts through the metal by vaporizing it, and leaves a clean, precise cut.

Tube bevel cutting refers to the process of removing material from the edge of a tube or pipe at a specific angle. This angle is crucial for achieving proper joints, especially when two tubes need to be connected at specific angles. Bevel cuts can vary in angles, commonly ranging from 30 degrees to 60 degrees. The precision and accuracy of tube bevel cuts are vital to ensure the structural integrity and functionality of the final product.

Why bevel cutting is important

Bevel cutting is a process where the edges of a piece of metal are cut at an angle. This is done in order to create a clean, precise edge on the metal. Bevel cutting is important because it allows for a cleaner cut when welding two pieces of metal together. It also helps to prevent the metal from chipping or breaking when it is being worked with.

The basics of bevel cutting with a tube laser cutting machine

Bevel cutting is a type of laser cutting that can be performed with a tube laser cutting machine. This type of machine uses a laser to cut through material, and can be used to cut various shapes and sizes of tubing. Bevel cutting with a tube laser cutting machine is a great way to add detail and interest to your projects.

There are two main types of bevel cuts: single-pass and multi-pass. Single-pass bevel cuts are made in one pass, while multi-pass bevel cuts are made in multiple passes. The number of passes will depend on the depth of the cut and the size of the tubing being cut. Bevel cuts can be made on both the inside and outside of the tubing.

The Role of FLT-9035ETN in Enhancing Bevel Cutting

  1. Precision and Versatility: The FLT-9035ETN, with its capacity to handle tubes ranging from 4000 to 9000 mm in length and 16 to 350 mm in diameter, offers unparalleled versatility. This range covers most industrial requirements for tube sizes, ensuring that various sectors can rely on this machine for their specific bevel cutting needs​​.
  2. Advanced Control Systems: The precision of bevel cuts is significantly influenced by the control over the cutting process. The FLT-9035ETN’s sophisticated low-voltage electrical system, managed by AC servo motors, provides precise control over the X, Y, and Z axes. This level of control is crucial for achieving the exact angles and depths required for bevel cutting​​.
  3. Superior Laser Technology: The fiber laser technology used in the FLT-9035ETN offers a high degree of precision. Its excellent beam quality ensures clean and accurate cuts, which is essential for bevel cutting, where the smoothness of the edge directly affects the quality of the subsequent weld​​.
  4. Material Handling Efficiency: The machine’s automated material handling system, including a chain-driven lifting frame and a segmented horizontal conveying device, ensures that tubes are precisely positioned for cutting. This system minimizes human error and increases the consistency of bevel cuts​​.
  5. High-Quality Components: The durability and reliability of the FLT-9035ETN are bolstered by its high-quality components. This reliability translates into consistent performance in bevel cutting, a process that demands uninterrupted precision over extended periods​​.

The advantages of using a tube laser cutting machine for bevel cutting

If you are looking for a versatile and precise laser cutting machine, then a tube laser cutting machine is the ideal choice. Here are some of the advantages of using a tube laser cutting machine for bevel cutting:

The use of tube laser cutting machines provides numerous advantages over traditional cutting methods. Firstly, the laser beam eliminates the need for physical contact with the tube, minimizing the risk of damage or deformation. This non-contact cutting also ensures the absence of burrs, resulting in finished products with exceptional edge quality. Tube laser cutting machines are programmable, allowing for precise and repeatable cuts, ensuring consistency in production. Moreover, these machines offer increased efficiency and reduced production time, contributing to cost savings.

1.Tube lasers can cut complex shapes with ease and accuracy.

2.Bevel cuts can be achieved with little to no post-processing required.

3.The tube laser cutting process is significantly faster than traditional methods, such as plasma or oxy-fuel cutting.

4.There is minimal material waste with tube laser cutting, which helps to keep costs down.

5.The quality of the cut is much higher with a tube laser, thanks to the precision of the machine.

6.Tube lasers are very versatile and can be used for a variety of materials, including metals, plastics, and glass.

7. The tube laser cutting process is quiet, clean, and produces little to no fumes.

8.The tube laser cutting process doesn’t require special safety equipment, which makes it a safer alternative to traditional methods.

How to set up the machine for bevel cutting

Contact us or read this brief introduction.

Application Industry of Bevel Tube Fiber Laser Cutting Machine

In the application industry of bevel tube fiber laser cutting machine, the machine is used to process various types of materials. The most common applications include cutting metals, plastics, and glass. The machine can also engrave or mark various materials. The bevel tube fiber laser cutting machine is a versatile tool that can be used in many industries.

The machine is mainly used in the automotive industry, where it can be used to cut car parts and components. It can also be used in the aerospace industry to cut aircraft parts. In addition, the machine can be used in the medical industry to create implants and other medical devices.

Read the full application industries of laser cutting machines.

Tips for getting the best results when bevel cutting with a tube laser cutting machine

There are a few things to keep in mind when bevel cutting with a tube laser cutting machine to get the best results. The first is to make sure that the tube is firmly clamped in place before starting the cut. This will help to prevent the tube from moving during the cutting process and creating an uneven cut.

It is also important to set the correct laser power and speed for the material being cut. If the laser power is too low, it can cause the cut to be ragged and uneven. If the speed is too high, it can cause the material to melt and distort.

Finally, it is important to use a coolant when cutting with a laser tube cutter. This will help to keep the material from overheating and prevent warping or melting.

Tube Bevel Cutting Skill

Acquiring the skill of tube bevel cutting is crucial for professionals in industries that rely on precise tube connections. It requires a combination of technical knowledge, experience, and attention to detail. To achieve optimal results, operators must master various techniques and factors that influence the bevel cutting process.

Techniques for Achieving Precise Tube Bevel Cuts

  1. Proper alignment and fixturing: Ensuring the tube is securely positioned and aligned before initiating the cutting process.
  2. Choosing the appropriate cutting parameters: Adjusting the laser power, cutting speed, and focus to achieve the desired bevel angle and edge quality.
  3. Utilizing advanced software: Programming the tube laser cutting machine with accurate dimensions and bevel angles to achieve consistent and precise cuts.
  4. Implementing real-time monitoring: Monitoring the cutting process to detect any deviations or errors and making necessary adjustments promptly.

Factors Affecting Tube Bevel Cutting Skill

  1. Material properties: Different materials require varying cutting parameters and techniques due to variations in hardness, thickness, and heat conductivity.
  2. Tube design and dimensions: The shape, size, and wall thickness of the tube influence the bevel cutting process, requiring adjustments accordingly.
  3. Machine calibration: Regular calibration and maintenance of the tube laser cutting machine ensure accurate and reliable results.
  4. Operator expertise: Well-trained operators with knowledge of the machine’s capabilities and programming can optimize the bevel cutting process.

Common Challenges in Tube Bevel Cutting

  1. Thermal distortion: The heat generated during the cutting process can cause thermal distortion in the tube, affecting the accuracy of bevel cuts.
  2. Warping and deformation: Improper fixturing or excessive heat can lead to warping or deformation of the tube, resulting in compromised joints.
  3. Burr formation: Inadequate cutting parameters or worn-out cutting nozzles can cause burrs, which must be removed to maintain the desired edge quality.
  4. Angular precision: Achieving precise bevel angles requires meticulous calibration and alignment of the tube and the cutting machine.

Safety Measures in Tube Bevel Cutting

When working with tube laser cutting machines, operators must prioritize safety. Some essential safety measures include:

  1. Proper training: Operators should receive comprehensive training on machine operation, safety protocols, and emergency procedures.
  2. Personal protective equipment (PPE): Wearing appropriate PPE, such as safety glasses, gloves, and protective clothing, to prevent injuries.
  3. Ventilation and exhaust systems: Ensuring proper ventilation to minimize exposure to fumes and dust generated during the cutting process.
  4. Machine maintenance: Regular inspection and maintenance of the cutting machine to prevent any malfunctions or safety hazards.

Maintenance and Calibration of Tube Laser Cutting Machines

Regular maintenance and calibration of tube laser cutting machines are essential for consistent and accurate bevel cuts. This includes:

  1. Cleaning and lubrication: Regularly cleaning the machine’s components and applying lubricants to ensure smooth operation.
  2. Nozzle and lens inspection: Checking and replacing worn-out cutting nozzles and lenses to maintain cutting efficiency and edge quality.
  3. Calibration checks: Periodically verifying and adjusting the machine’s calibration settings to ensure precise cuts.
  4. Software updates: Keeping the machine’s software up to date to access the latest features and enhancements.

Conclusion

Tube bevel cutting skill, coupled with the capabilities of tube laser cutting machines, plays a vital role in achieving precise and high-quality tube connections. By employing proper techniques, considering relevant factors, and adhering to safety measures, professionals can enhance their bevel cutting expertise. The advancements in tube laser cutting technology continue to streamline the manufacturing processes across various industries, driving efficiency and cost-effectiveness.

FAQs

  1. What industries benefit from tube bevel cutting?
    • Tube bevel cutting is beneficial in industries such as automotive, aerospace, and construction, where precise tube connections are crucial.
  2. Can tube bevel cutting be performed manually?
    • While manual bevel cutting is possible, the use of tube laser cutting machines ensures higher precision, efficiency, and consistency.
  3. What are the advantages of using tube laser cutting machines?
    • Tube laser cutting machines offer non-contact cutting, exceptional edge quality, precise cuts, and increased efficiency.
  4. How important is machine calibration in tube bevel cutting?
    • Machine calibration is crucial in ensuring accurate and reliable bevel cuts, maintaining consistency in the production process.
  5. What safety precautions should operators take during tube bevel cutting?
    • Operators should receive proper training, wear appropriate PPE, ensure adequate ventilation, and perform regular machine maintenance to prioritize safety.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@jqlaser.com”. 

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@jqlaser.com”. 

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@jqlaser.com”.