T1 Pipe Laser Cutting Machine
If you’re looking for a high-quality T1 pipe laser cutting machine, look no further than us. We’re confident in our ability to provide a top-notch product that will meet your needs and exceed your expectations.
Here at our company, we take pride in our workmanship and attention to detail. We only use the highest quality materials to construct our T1 pipe laser cutting machines. And we stand behind our products 100%.
So if you’re in the market for a top-of-the-line T1 pipe laser cutting machine, give us a call today. We’ll be happy to answer any questions you have and provide you with a free quote.
|Maximum cutting length
|Maximum weight for each tube
|X.Y.Z axis position accuracy
|Maximum running speed
The main use and application scope of the product
It is mainly used for round, square, rectangular, elliptical and waist round pipes of common carbon steel and stainless steel materials, cutting workpiece size Φ15-Φ165mm (workpiece external circle), feeding maximum length ≤7000mm.
The main composition of the product
The main components of T1 series laser pipe cutting machine are: main machine tool, chain type semi-automatic feeding mechanism, control system, laser, water chiller, extractor fan, etc.
Machine tool host part
The main part of the machine is the main component of the whole laser pipe cutting machine, the cutting function and cutting accuracy of the laser pipe cutting machine are realized by the main part, the main part is composed of bed and auxiliary support, X-axis gantry, chuck part, Z-axis device, front receiving device, auxiliary system (protective outer cover, air and water circuit), operation table and other parts.
Semi-automatic feeding mechanism
The semi-automatic feeding mechanism can realize the semi-automatic feeding function of round pipe, square pipe, rectangular pipe and profile, and the pipe needs to be placed in the storage part manually.
Electrical control part
Laser pipe cutting machine electrical control system is an important part of ensuring the running trajectory of various graphics, the general electrical control system is mainly composed of CNC system and low-voltage electrical system.
The machine tool CNC system configuration high-performance CNC system, the system is based on windows operating platform, stable and reliable operation, containing 64-bit microprocessor; the system has a fast interpolation operation speed, easy to operate, good dynamic performance, strong load capacity and other characteristics.
Low-voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor used to drive the X-axis, Y-axis, AW (synchronous rotation) axis of the machine tool, characterized by good acceleration performance, fast response speed, W, Y-axis maximum positioning speed of up to 100m/min; machine tool Z-axis for the feed axis, using AC servo motor (with holding brake) for driving: that is, Z-axis cutting head, characterized by good dynamic response characteristics, both with the control and NC control.
Auxiliary peripheral equipment
Including water chiller, cold air system, exhaust system, etc.
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.