Ultra High Power Laser Plate Cutting Machine JQ-2560HP
There are many reasons to choose an Ultra High Power Laser Plate Cutting Machine JQ-2560HP over a traditional plate laser cutting machine. Here are just a few:
1. With an Ultra High Power Laser, you can cut through thicker and tougher materials with ease.
2. The JQ-2560HP is able to produce a higher quality cut, thanks to its precision engineering.
3. This machine is also much faster than a traditional plate laser cutter, meaning you can get the job done in a fraction of the time.
If you’re looking for the best possible laser cutter on the market, then you need look no further than the Ultra High Power Laser Plate Cutting Machine JQ-2560HP.
|X.Y.Z axis position accuracy||±0.05mm/m|
|Maximum running speed||120m/min|
|Maximum table loading weight||3000kg|
The main use and scope of application of the product
JQ-2560HP is an exchange table closed fiber laser cutting machine developed by Jinqiang Laser for the actual needs of the sheet metal processing industry, the front and rear two platforms for rapid parallel exchange, greatly reducing the time used for loading and unloading, to improve processing efficiency.
It is mainly used for ordinary carbon steel plate, stainless steel plate, aluminum alloy plate, copper plate, etc. The cutting workpiece size is 2500X6000, and the maximum length is 6000mm.
The main composition of the product
The main components of JQ-2560HP series exchange platform laser plate cutting machine are: machine tool host, appearance protection system, control system, laser, water cooler, extractor fan, etc.
Machine tool host part
The host part of the machine is the main component of the whole exchange platform laser cutting machine, the cutting function and cutting accuracy of the exchange platform laser cutting machine are realized by the host part, the host part is composed of plate welding bed, machine plus beam and Z-axis device, funnel drawer, exchange platform, auxiliary system (lubrication, gas and water), operating table and other parts.
Electrical control part
Exchange platform laser cutting board machine electrical control system is to ensure that the various graphics running track of an important part of the general electrical control system is mainly composed of CNC system and low-voltage electrical system.
This machine tool CNC system configuration high-performance CNC system, the system is based on windows operating platform, stable and reliable operation, containing a 32-bit microprocessor; system has a fast interpolation operation speed, easy operation, good dynamic performance, strong load capacity and other characteristics.
Low-voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor for driving the machine tool X axis, Y axis, characterized by good acceleration performance, fast response speed, X,Y axis maximum positioning speed up to 120m/min; machine tool Z axis for the feed axis, using AC servo motor (with holding brake) drive: that is, Z axis cutting head, characterized by good dynamic response characteristics, both with the control and NC control.
Auxiliary peripheral equipment
Including water chiller, cold air system, exhaust system, etc.
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.